Page 133 - Unistrut-Australia Catalog
P. 133

                                                                                  ACROFIL® – SPECIFICATION
1.0 ACCEPTABLE MANUFACTURES
Provide “ACROFIL®” Wire Basket type of cable management system as manufactured by Unistrut® or engineered approved equal.
All cable trays shall be installed in a neat uniform fashion.Installing contractor shall field modify tray system to accommodate the exact routing requirements.
2.0 MATERIAL/FINISHES
Wire basket tray to be fabricated from high strength steel wires.
2.1 Acceptable finishes
2.1.a Standard Finish
Zinc Plated Steel in accordance with AS 1789
2.1.b Other Finishes
Hot Dipped Galvanised – Steel in accordance with AS/NZS 4680
Pregalvanised Galvabond – AS 1397 with a coating class of Z275. SS – AISI 316L stainless steel.
3.0 - STRAIGHT SECTIONS
Straight sections shall be manufactured from high strength steel wires forming 50mm X 100mm openings and shall conform to the following dimensions.
3.1 Length
Straight sections shall be supplied in 3m lengths.
3.2 Width
Widths shall be 50, 100, 150, 200, 300, 400, 450, 500, or 600 as called out on drawings. (mm)
3.3 - Load depths
The load depths shall include 50mm & 100mm as required.
4.0 SPLICES
All straight sections shall be supplied with pre-installed, auto-locking, splices plates, where possible, as per Unistrut® “ACROFIL®”. Trays design shall allow for a snap together type connection and shall require no nut and bolt assembly.
5.0 FITTINGS
All fittings shall be fabricated in the field as required,
per manufacturer’s recommendations. Radius of the fittings shall be based on the “minimum bending” radius of the cables being installed.
6.0 ACCESSORIES
Accessories such as blind ends, dropouts, and barriers, etc... shall be installed as specified on drawings.
7.0 SUPPORTS
Supports shall include, but are not limited to, center type, trapeze type, wall supports, and floor supports.
7.1 Auto Locking
All supports shall be supplied with an Auto locking feature, requiring no special tools for attachment of the trays.
7.2 Finish
All supports, including threaded rod and associated hardware shall be zinc plated coated to AS 1789.
       www.unistrut.com.au 131
            ACROFIL® SPECIFICATIONS CABLE TRAYS
   C
T
E
U
R
L
T
E
S
B
4
F
2
9
1
R
O
S
I
N
A
C
E
S
R
T
A
E
Y
I
N
G
9
0






























   131   132   133   134   135