Page 36 - Unistrut-Australia Catalog
P. 36

 34
www.unistrut.com.au
HARDWARE
HEX HEAD SET SCREWS
PAN HEAD SCREWS
COUNTERSUNK HEAD SCREW
Part No.
HHS0620 HHS0625 HHS0630 HHS0820 HHS0825 HHS0830 HHS0840 HHS1020 HHS1025 HHS1030 HHS1040 HHS1224 HHS1230 HHS1240 HHS1260 HHS1640
Size
M6 x 20 M6 x 25 M6 x 30 M8 x 20 M8 x 25 M8 x 30 M8 x 40 M10 x 20 M10 x 25 M10 x 30 M10 x 40 M12 x 24 M12 x 30 M12 x 40 M12 x 60 M16 x 40
Mass kg/100
0.6 0.7 0.8 1.2 1.4 1.5 1.8 1.9 2.1 2.5 3.0 4.2 4.5 5.1 7.5 9.5
Part No.
PHS0620 PHS0625 PHS0630 PHS0825
Size
M6 x 20 M6 x 25 M6 x 30 M8 x 25
Mass kg/100
0.6 0.7 0.8 1.3
Part No.
CKS0615 CKS0620 CKS0820 CKS1020
Size
M6 x 15 M6 x 20 M8 x 20 M10 x 20
Mass kg/100
0.3 0.4 0.8 1.3
HEXAGON NUTS
FLAT WASHERS
SPRING WASHERS
Part No.
HN06 HN08 HN10 HN12 HN16 HN20
Size Mass kg/100
M6 0.2 M8 0.5 M10 0.8 M12 1.8 M16 3.3 M20 5.6
Part No.
FW06 FW08 FW10 FW12 FW16 FW20
Size Mass kg/100
M6 0.1 M8 0.1 M10 0.3 M12 0.4 M16 0.8 M20 0.9
Part No.
SW06 SW08 SW10 SW12 SW16 SW20
Size Mass kg/100
M6 0.1 M8 0.2 M10 0.3 M12 0.4 M16 0.6 M20 1.0
SHAKEPROOF LOCK WASHERS
UNIROD STEEL THREADED ROD
Max. Mass Part No. Size Recommended kg/ea
Part No. Size
LW06 M6 LW08 M8 LW10 M10 LW12 M12 LW16 M16 LW20 M20
DROP IN ANCHOR
Part No.
HAD06 HAD08 HAD10 HAD12
Size
M6 X 25 M8 X 30 M10 X 40 M12 X 50
Finish
Part No.
RC06 RC08* RC10* RC12* RC16* RC20*
Size
M6 M8 M10 M12 M16 M20
Length ‘A’
20 25 30 40 50 50
0.6 1.1 1.5 2.4 3.9 6.3
Mass kg/100
1.2 2.3 4.0 7.8 12.2 19.0
Standard Finish: Zinc Plated.
*Also available in Hot Dipped Galvanised.
Standard Length: 3m
Unirod Load Data: Maximum recommended tensile load is based on a safety factor of 2.5 using the appropriate stress area of thread and ultimate tensile strength of 430 MPa.
L
Standard Finish: Zinc Plated.
*Also available in Hot Dipped Galvanised.
Mass kg/100
0.05 0.06 0.08 0.10 0.13 1.20
Mass kg/100
Tensile Load (kN)
UR06 M6 3.22 UR08* M8 5.84 UR10* M10 9.28 UR12* M12 13.48 UR16* M16 25.12 UR20* M20 39.20
ROD COUPLERS
ZP 0.7 ZP 1.2 ZP 2.3 ZP 4.5
CONE POINT SET SCREW
SLOTTEDHEXHEADSETSCREWS
Part No.
CPS1040 CPS1240 CPS1250
Size
M10 x 40 M12 x 40 M12 x 50
Mass kg/100
2.3 3.8 4.4
Part No.
SHS0620 SHS0825 SHS0830
Size
M6 x 20 M8 x 25 M8 x 30
Mass kg/100
0.6 1.2 1.3
STRUT NUTS STRUT SYSTEMS











   34   35   36   37   38