Page 42 - Unistrut-Australia Catalog
P. 42

           CANTILEVER BRACKETS – GENERAL INFORMATION
MATERIAL
Unless otherwise noted, all fittings are punch press formed from plate or strip steel.
FITTING APPLICATION
All product drawings illustrate only one application of each fitting. In most cases many other applications are possible.
The members shown in the illustrations are P1000®, 41mm square, except where noted otherwise. All 14mm diameter holes use M12 x 24 hex head set screws and M12 nuts - P1010, P4010 or P5510 - depending on the channel used. Nuts and bolts are not included with the fitting and must be ordered separately.
DESIGN LOAD DATA
Loadings are as shown based on calculations in accordance with AS/NZS 4600 and AS 4100.
DESIGN BOLT TORQUE
Refer to Engineering Data (See Page 49).
FINISHES
All fittings in this section are Hot Dipped Galvanised to AS/NZS4680 unless otherwise shown.
STANDARD DIMENSIONS
The following dimensions apply to all fittings except as noted on the individual part drawings:
Hole Size Hole Spacing Hole Spacing Width
- 14mm diameter - 21mm from end - 48mm on centre - 40mm
      P2233 & P2234
21
130
Brackets can be used inverted
P2663 - 250 TO P2663 - 700
40
Brackets can be used inverted
             8
                 6
L
                139 97
L
                Part No.
   L
 Design Uniform Load - kN
 Mass kg/100
  P2663-250
 250
 3.01
 102
  P2663-400
 400
 1.88
 143
  P2663-550
 550
 1.36
 186
  P2663-700
  700
  1.06
   229
   Part No.
   L
 Design Uniform Load - kN
 Mass kg/100
  P2233
 457
 3.14
 189
  P2234
  610
  1.97
   232
      P1075 - 8
206 149
P1000, P2000, P4001
* Applies only to fittings and not to strength of Unistrut® arm. Designed for use with “Unistrut®” nuts, do not use through bolts.
PCL150 TO PCL600
Brace
P1000 Channel
            Part No.
   L
 H1
   H2
 Design Uniform Load kN
 Mass kg/100
  PCL150
 320
 200
 160
 4.47
 179
  PCL300
 470
 200
 160
 3.17
 239
  PCL450
 635
 235
 195
 3.33
 349
  PCL600
  780
  235
  195
  2.80
   389
   Part No.
 Design Moment kN*
 Mass kg/100
   P1075-8
  0.58
  130
    40 www.unistrut.com.au
CANTILEVER BRACKETS & ADJUSTABLE BRACE FITTINGS STRUT SYSTEMS
   40   41   42   43   44