Page 46 - Unistrut-Australia Catalog
P. 46

                   BEAM CLAMPS
    P2785 & P2786
76
22
A
Use in pairs only
P2785 accepts following channels:
P1000®, P2000, P3300, P4000
A = 86 Mass: 38kg/100
For use with beams up to 19mm
P2786 accepts following channels:
P1001, P2001, P5500
A = 127 Mass: 41kg/100 For use with beams up to 19mm
Design Load each:
4.45kN
Standard Finishes:
Z.P & H.D.G + SS
P1796
M10 x 40mm cone-pointed screw included
22
45
Mass: 49kg/100 Suits P1000® & P2000
Design Load each:
2.22kN
Standard Finishes:
Z.P & H.D.G.
                                      90
         90
     Use in pairs only
    P1271
M12 x 40mm cone-pointed screw included
22
41 10
2 holes 38 14mm dia.
Use in pairs only
Mass: 43kg/100 Design Load each:
2.22kN
Standard Finishes:
H.D.G.
Requires P1010 Channel nut & bolt
P1272
22
Use in pairs only
Mass: 18kg/100 Design Load Per Pair:
2.00kN
Standard Finishes:
Z.P., H.D.G., & S.S.
      M10 x 40mm cone-pointed screw included
                                    P1270
20
40
M10 x 40mm cone-pointed screw included
Mass: 29kg/100 Design Load each:
0.38kN
Standard Finishes:
Z.P. & H.D.G.
Tapped hole to accept M10 Unirod,
to be secured with M10 nut (not included)
P3087
Slip
Hardened cone-point adjusting screws included
A
A - 25
Mass: 61.7kg/100 Safety Factor: 3
Standard Finishes:
Z.P. & H.D.G.
P3087A
Channel
Adjusting Screws Included
                    Pull Out
              Unistrut® Channel
not included
P3087B
                                      70 32
   Channel Type
  Design Pullout Load kN
 Design Slip Load kN
   P1000
   4.45
   3.56
   P2000
  2.22
  1.33
                                44 www.unistrut.com.au
BEAM CLAMPS STRUT SYSTEMS














   44   45   46   47   48