Page 88 - Unistrut-Australia Catalog
P. 88

           NEMA ALUMINIUM CABLE LADDER - ACCESSORIES
  SPLICE PLATE
The unique Unistrut® aluminium splice plate is close fitting and shaped so that it is retained neatly and firmly between mating flanges incorporated in the ladder-side rails.
 EXPANSION HOLD DOWN BRACKET
General purpose hold-down bracket can be positioned at any point along ladder length, even in the situation where a rung and support member coincide. The bracket provides a large bearing area for the side-rail and permits free expansion movement to occur. For side mounted ladders, or where rigid fixing of ladder is required, the rigid clamping bracket can be used.
RIGID HOLD DOWN BRACKET
General purpose hold-down bracket can be positioned at any point along ladder length, even in the situation where a rung and support member coincide. The bracket provides a large bearing area for the side-rail and permits free expansion movement to occur. For side mounted ladders, or where rigid fixing of ladder is required, the rigid clamping bracket can be used.
Z HOLD DOWN BRACKET
INTERFACE SPACER
Used to separate cable ladder and supports in corrosive environments.
 Type
 Part No.
 12
 AL12SP
 16
 AL16SP
 20
   AL20SP
  20C
   LAL30
   Type
 Part No.
 AL12,16,20
 ALEHD
 20C
   LAL50
       HINGED HORIZONTAL SPLICE
A fast and economical method of changing ladder direction where exact site dimensions must be met. Especially suitable where the angle is less that 45°, or larger angles where the cable bending radius is not important. Also provides a flexible alternative to standard accessory sizes and radii. Suits all Unistrut® aluminium cable ladder systems.
HINGED VERTICAL SPLICE
Ideal for making changes in vertical level or direction. Easily adapts to exact site dimensions which may otherwise be difficult to achieve with fixed risers. Cables form their own bending radius spanning between adjacent end-rungs. Also used to form adjustable risers providing flexibility to adjust to any site restrictions.
 Type
 Part No.
 All Aluminium Systems
   ALRHD
   Type
 Part No.
 12
 AL12HHS
 16
 AL16HHS
  20
  AL20HHS
   20C
  LAL35
      Type
 Part No.
 AL12
 AL12ZHDBSS
 AL16
 AL16ZHDBSS
 AL20
 AL20ZHDBSS
  20C
  LAL20CZHDBSS
     Type
 Part No.
  12
  AL12HVS
   16
 AL16HVS
 20
 AL20HVS
  20C
  LAL36
     Type
 Part No.
  All Aluminium Systems
  ALS54
      REDUCER SPLICE
DIVIDER STRIP
Divider Strip is used to separate cables
of different voltages or circuits. The notched base permits forming to the required shape.
 Type
    Width “mm”
  Part No.
  12
  75
 AL12RS75
 12
   150
 AL12RS150
 12
    300
  AL12RS300
  16
  75
 AL16RS75
 16
    150
  AL16RS150
  16
  300
 AL16RS300
 20
    75
  AL20RS75
  20
  150
 AL20RS150
 20
   300
 AL20RS300
 20C
    75
  LAL380
  20C
  150
 LAL381
 20C
    300
  LAL383
  Type
 Part No.
  All Aluminium Systems
  ALDS3
   Reduction of ladder width is normally carried out using straight or offset reducers. Reducer splice plates are a flexible, cost effective alternative which bolt directly to the ladder side-rails. Available for all aluminium cable ladder systems.
  86 www.unistrut.com.au
ALUMINIUM SHAPES & ACCESSORIES NEMA CABLE LADDERS
   86   87   88   89   90